Copyright 2011©Geoarmatech Company Kelunji EchoPro SMA STRONG MOTION ACCELEROGRAPH FEATURES o All-in-one sensor and recorder o Low price o Internet ready o GPS or NTP timing o USB data storage o Up to 2000 samples per second recording o Ethernet included as standard o Web browser user interface o optional LCD panel for setup & display o optional internal battery APPLICATIONS The Kelunji EchoPro SMA can be used for structural monitoring, blast and other vibration  monitoring. It can record continuously or record only events above a certain level of ground  motion, or when an above average signal is detected. The EchoPro is simple to use, easy to  install and maintain, light and robust. Easily networkable for data telemetry via Ethernet.  Kelunji EchoPro Seismograph  PORTABLE/PERMANENT VIBRATION & EARTHQUAKE RECORDER FEATURES o Low price, high performance o 24-bit, high dynamic range, low noise o Internet ready o 6-channels standard, 12-ch optional o Up to 2000 samples per second recording o GPS or NTP timing o USB data storage o Ethernet o Web-based user interface o optional LCD panel for setup & display o optional internal triaxial accelerometer o optional internal battery   APPLICATIONS The Kelunji EchoPro can be used to log data from almost any type of sensor in either  continuous or triggered mode, with all data time-stamped by GPS and perfectly  synchronised. With options of 6-channel and 12-channel recording, almost limitless storage  via USB, and options for display and power, the EchoPro is the most user-friendly and  flexible seismograph in the world today.  Kelunji EchoPro Blast Monitor RUGGED VIBRATION & EARTHQUAKE RECORDER FEATURES o 24-bit ADC on 6 or 12 channels o Up to 2kHz sampling on 6 channels o Locked to absolute time using GPS or NTP o USB data storage for continuous recording o Ethernet connection for remote web login o LCD panel & keypad for field settings o Internal battery for all-day recording   APPLICATIONS Perfect for portable earthquake and other vibration monitoring, with high dynamic range 24-  bit digitisers sampling data at up to 2000 samples per second. Designed to advance the  game in blast monitoring. Improve your blast recording resolution and sensitivity by a factor  of over 4000 with EchoPro. With GPS time-locked recording and USB storage, you can set  recorders to run all day, recording continuously and triggering, with up to 6 channels  recorded at 2kHz from your geophone, accelerometer, and/or microphone.  Kelunji Fusion BLAST & VIBRATION RECORDER FEATURES o 24-bit ADC on 4 channels o Up to 50kHz sampling o Locked to absolute time using GPS or NTP o USB data storage for continuous recording o Ethernet connection for remote web login o LCD panel & keypad for field settings o Internal battery for all-day recording APPLICATIONS The ultimate in near-field vibration recording. Forget 12-bit and 16-bit blast monitors.  Improve your recording resolution and sensitivity and never miss another event. No longer  do you need external triggers to synchronise your waveforms - with GPS time-locked  recording and USB storage, you can set recorders to run all day recording continuously and  triggering, with up to 4 channels recorded at up to 50kHz from your geophone and  microphone.  Baykal-ACN PORTABLE VIBRATION & EARTHQUAKE RECORDER FEATURES o 24-bit ADC on 3 channels o Up to 2kHz sampling o Locked to absolute time using GPS o USB/Flash Card data storage for continuous recording o Internal battery for all-day recording APPLICATIONS TThe "Baykal-ACN" is a complete, self-contained, portable 3-channel engineering seismic  data acquisition system, combining extended frequency range, built-in (or external) GPS-  receiver, temperature-compensated generator, USB 2.0 interface and replaceable internal  flash memory up to 32 Gb.The device is performed in a very compact, light and waterproof  case. The power supply - 2 D-type removable cells or from external 12 V DC source.   The "Baykal-ACN" data acquisition system is ideally suited for portable engineering,  geophysical and seismological applications. Baykal-7HR  (BY-7HR) PORTABLE VIBRATION & EARTHQUAKE RECORDER FEATURES o 24-bit ADC on 3 or 6 channels o Up to 2kHz sampling o Locked to absolute time using GPS o USB/Flash Card data storage for continuous recording o Internal battery for all-day recording APPLICATIONS This high-performance self-contained 3- or 6-channel seismic digital recorder has the high-  resolution ?-? analog-to-digital converter, stabilized temperature-compensated generator,  reliable reverse-voltage and short circuit protection and built-in (or external) GPS-receiver with  5m GPS antenn cable. The device can be supplied with the remote (up to 200m) GPS-  receiver that alows it's stable operation in enclosed spaces (such as vault etc.). Applications:  self-contained portable seismic and geophysical data acquisition systems. Equipped with  included data download management software, data analysis and processing software.    Vibracord Dx - Digital seismograph The family of vibration measuring instrument Vibracord DX is used in construction work, mining,  blasting, demolition or other works where vibrations cannot be completely avoided. To exclude  any damage or risk, measurement and analysis of these vibrations are required.  High-Tech benefits:  -FFT frequency annalysis is performed in the equipment. You known in real-time the FFT  frequency of your record. Don't wait to the office  · -The data transfer to an external USB-Disk allows an easy way to get the records, without the  need of a computer. Equipment could be all time at work, and you don't need portable computer  to get the data at work.  -The Ethernet port gives a fast data transfer, even from a remote computer.   -The printer allows to print an online record.   -With the external trigger it is possible to synchronize the beggining of the record with the firing.   -The MODEM option, allows a remote control and data access from everywhere on the world,  from the Web browser of your mobile phone or computer. Send SMS to your phone or e-mails  to your account when a record occurs.